For Homes
We find pool and spa leaks for homeowners without draining the pool. You get a written report and a clear repair plan.
- Pool level drops overnight
- Wet spot near equipment pad
- Spa loses heat and water
Pool and Spa Leak Location Wellington FL: Find the Leak, Stop the Loss
Pool and Spa Leak Location Wellington FL is what we do when your water bill climbs and your pool level drops. We use acoustic listening devices, thermal imaging cameras, and pressure testing equipment to find the leak without tearing up your deck. If you have been searching for pool leak detection near me, our team covers Wellington and Palm Beach County with same-day appointments.
Pressure test linesThermal scan deckDye test shell- We mark the spotYou see the evidence
- We test after repairConfirm the leak stopped
- We explain findingsPhotos and written report
- We protect your deckDrop cloths and clean work
What Our Pool and Spa Leak Location Service Includes
Every visit covers a full inspection, pressure testing, and a written report. Repairs are quoted separately so you can decide what works for your budget. We do not bundle unnecessary work.
Full Pool and Spa Inspection
We check the shell, skimmer, light niches, return fittings, and equipment pad. A moisture meter and thermal imaging camera scan the deck and soil for saturated zones. This takes 30 to 45 minutes.
Pressure Testing of All Lines
We isolate and pressurize each plumbing run to find the leaking line. Acoustic listening devices and ultrasonic leak detectors narrow the location. This is the most reliable way to find underground pool leaks.
Dye Test and Visual Confirmation
For shell leaks, we use a dye test to watch water pull into the crack. You see the evidence on video or in person. No guesswork, no unnecessary excavation.
Written Report With Photos
You get a documented report showing the leak location, the method used, and recommended repairs. This is useful for insurance claims or HOA approvals. We email it the same day.
Repair Quote and Options
We provide a written quote for the repair with material options. Most fixes use pipe repair clamps, epoxy pipe sealant, or replacement fittings. You decide when to schedule the work.
Homes and businesses.
The approach is the same for a home and a business. What changes is the access, the schedule and who needs the paperwork.
For Businesses
We locate leaks in community pools, hotel spas, and HOA amenities. You get documentation for approvals and minimal downtime.
- Community pool losing water
- Hotel spa jet line leak
- HOA amenity pressure testing
Pool and Spa Leak Location Wellington FL: What It Is and Why It Matters
A plain-language look at what Pool and Spa Leak Location involves and when it is needed.
See how it worksPool and Spa Leak Location Wellington FL is the process of finding where water is escaping from your pool shell, plumbing, spa jets, or equipment pad. We start with a visual walk of the pool and spa, then use acoustic listening devices and pressure testing equipment to isolate the leak. Thermal imaging cameras help us spot temperature differences in the deck and soil. Most residential pools lose a quarter inch to half inch of water per day to evaporation in Florida, so anything beyond that gets our attention.
Wellington homeowners call us when the water bill jumps, the pump loses prime, or a wet spot shows up near the equipment pad. Our pool leak detection Wellington service covers everything from pinhole leaks in copper pipes to cracked skimmer throats and failed light niches. If you have been wondering how to tell if your pool is leaking in Wellington, start by marking the water level with tape and checking it 24 hours later.
Finding the exact leak point first keeps the repair small and the water bill down.
- What it is
- Locating water loss in pool shells, plumbing, spas, and equipment pads using acoustic and thermal tools.
- When you need it
- When water loss exceeds a quarter inch daily, the pump loses prime, or wet spots appear.
- What to expect
- A one to two hour inspection with pressure testing, thermal imaging, and a written report.
How Our Pool and Spa Leak Location Process Works
Every job follows the same five steps. You know what is happening, what it costs, and what comes next.
-
Phone Intake
We ask about water loss, pump behavior, and any wet spots. You get a clear arrival window and a rundown of what the visit covers. Most calls take five to ten minutes.
- Phone intake
- Water loss history
- Schedule visit
-
On-Site Inspection
Our technician walks the pool, spa, and equipment pad. We check skimmer throats, light niches, return fittings, and the backwash line. A moisture meter and thermal imaging camera scan the deck and soil for saturated zones.
- Visual walk
- Moisture scan
- Equipment check
-
Pressure Testing
We isolate the pool plumbing runs and pressurize them one at a time. A drop in pressure tells us which line is leaking. Acoustic listening devices and ultrasonic leak detectors narrow the location to within a foot or two.
- Isolate lines
- Pressurize runs
- Find pressure drop
-
Leak Confirmation
We mark the spot, take photos, and show you the evidence. If the leak is in the shell, we use a dye test to watch water pull into the crack. You see exactly what we see before any repair starts.
- Mark location
- Photo evidence
- Dye confirmation
-
Repair Plan and Fix
You get a written scope with pricing. Most repairs take two to four hours. We pressure test again after the fix and run the pump to confirm the leak is stopped before we pack up.
- Written scope
- Repair options
- Re-test after fix
Tools and Methods We Use
Move across a circle, or focus it and press Enter, for an illustrative thermal view of the photograph.
Acoustic Listening Devices
We use these to hear the sound of water escaping underground. They narrow the leak location to within a foot or two, so we dig less.
Thermal Imaging Cameras (FLIR)
These cameras show temperature differences in the deck and soil. Wet areas read cooler, helping us map the leak path without digging.
Pressure Testing Equipment
We isolate each plumbing run and pressurize it. A pressure drop tells us which line is leaking. This is the most reliable method for underground pool lines.
Video Pipe Inspection Cameras (SeeSnake)
We run these through accessible lines to see cracks, root intrusion, and blockages. They confirm the leak source and help plan the repair.
Tracer Gas Leak Detectors (Sewerin)
We introduce a safe tracer gas into the line and detect where it escapes. This finds leaks that acoustic devices miss, especially in noisy environments.
Thermal views are illustrative, generated from the photographs.
Methods
Moisture Meters (Fluke, UEi)
We use these to measure moisture levels in the deck, soil, and surrounding structure. They confirm the leak zone and rule out other water sources.
Electromagnetic Pipe Locators (RIDGID)
These trace underground pipes without digging. We map the pool plumbing and irrigation lines before any excavation starts.
Pressure Isolation Testing
We plug and pressurize each pool plumbing line individually. A drop in pressure identifies the leaking run. This method works on copper pipe, PEX tubing, PVC pipe, and CPVC pipe. It is the standard for underground leak location.
Dye Testing for Shell Leaks
We inject a dye near suspect areas like light niches, skimmer throats, and return fittings. If water is escaping, the dye gets pulled into the crack. This confirms shell leaks without draining the pool.
Thermal Imaging Survey
We walk the deck and surrounding soil with a thermal imaging camera. Wet areas show a temperature difference. This method maps the leak path and helps us choose the least invasive repair.
Acoustic Leak Detection
We use acoustic listening devices and ultrasonic leak detectors to hear water escaping under pressure. This narrows the location to a small area. It works through concrete, soil, and water.
When Wellington Homeowners Call Us
Pool losing water
You notice the pool level drops two inches overnight and the deck stays wet near the skimmer.
We inspect the skimmer throat and pressure test the suction line. Acoustic listening devices confirm the leak location. We repair the cracked fitting and re-test the line.
Outcome: The pool holds its level, the deck dries out, and your water bill returns to normal within a month.
Spa heat loss
Your spa loses heat and the water level drops faster than the pool.
We isolate the spa plumbing and check the jet bodies with a dye test. Thermal imaging cameras scan the equipment pad for moisture. We replace the failed jet gasket and seal it.
Outcome: The spa holds heat and water again. You stop adding make-up water every few days.
Pump losing prime
The pump keeps losing prime and you hear air in the system.
We pressure test the suction side and use ultrasonic leak detectors to find the air draw. A cracked PVC pipe or loose fitting is usually the cause. We repair it with new fittings and PVC cement.
Outcome: The pump primes normally, the air noise stops, and the system runs at full pressure.
Pre-purchase inspection
You are buying a home in Wellington and the inspection notes a possible pool leak.
We run a full pool and spa leak location with pressure testing and thermal imaging. You get a written report with photos and repair costs. This helps you negotiate or budget for the fix.
Outcome: You know exactly what you are buying and what the repair will cost before you close.
How Pool and Spa Leak Location Works in Wellington
Wellington sits on sandy soil with a high water table, and that combination stresses pool plumbing year-round. Summer rains saturate the ground, shifting pipes and opening joints. Winter dry spells shrink the soil and crack PVC. We see the same failures repeatedly: cracked skimmer throats in older Palm Beach Polo homes, failed light niches in Binks Forest pools, and pinhole leaks in copper pipes at the equipment pad.
Our team knows the local building stock and the Palm Beach County code requirements for pool plumbing repairs. If you need affordable pool leak detection Wellington FL, we keep the job efficient by knowing where these systems typically fail. We also handle emergency spa leak location in Wellington, Florida, when a spa loses water fast and the heater is at risk.
- Palm Beach Polo: Many pools here were built in the 1980s and 1990s. Original copper pipe and older PVC fittings are common leak points. We check the equipment pad and underground lines first.
- Binks Forest: Larger lots with extensive irrigation systems. Sprinkler leaks can mimic pool leaks by raising the water table. We isolate both systems during the inspection.
- Olympia: Community pools and spas with commercial-scale plumbing. We use video pipe inspection cameras and pressure testing to diagnose shared lines without shutting down the amenity.
- Isles at Wellington: Newer construction with PEX tubing and CPVC pipe. Leaks here are often at fittings or where the line transitions from the equipment pad underground.
- High water table during summer rainy season: Saturated soil can mask a leak and make pressure testing tricky. We account for groundwater by testing when the table is lower or using tracer gas methods.
- Sandy soil that shifts with wet and dry cycles: Pipe joints flex and crack over time. We see more leaks at fittings and elbows than in straight pipe runs. Our repairs use flexible couplings where code allows.
We walk the pool, spa, and pad with you. We set up gear and protect the deck. We explain findings and next steps.
From problem to finished result.
Palm Beach Polo Pool Losing Two Inches Daily
Before: A homeowner in Palm Beach Polo was adding water every two days. The pool deck near the skimmer stayed wet. A previous company suggested draining the pool and replacing all the plumbing.
After: We pressure tested the suction line and found a cracked fitting two feet from the skimmer. The pool now holds its level, and the water bill dropped back to normal the following month.
Check the water level weekly with a tape mark. Keep the skimmer basket clean and watch for wet spots after heavy rain. Schedule a pressure test every two years if the pool is over 15 years old.
Binks Forest Spa Leak and Heater Damage
Before: A spa in Binks Forest was losing heat overnight and dropping an inch of water daily. The heater was cycling constantly. The homeowner thought the heater was failing and was ready to replace it.
After: We isolated the spa jet line and found a failed gasket at the third jet. The dye test confirmed it in minutes. We replaced the gasket and sealed it with epoxy pipe sealant. The spa holds heat and water again.
Inspect spa jets monthly for cracks or loose fittings. Keep the water chemistry balanced to protect gaskets. If the spa loses heat again, check the jet bodies before calling a heater tech.
Olympia Community Pool Underground Line Leak
Before: A community pool in Olympia was losing 3,000 gallons a week. The leak was underground somewhere between the equipment pad and the pool.
After: We used electromagnetic pipe locators to map the line, then pressure tested each run. Acoustic listening devices pinpointed the leak 12 feet from the pad. We excavated a two-foot square, repaired the cracked PVC pipe, and backfilled.
Log water meter readings weekly for community pools. Watch for soft spots in the deck or landscaping. Schedule annual pressure testing on commercial pool lines to catch leaks early.
Pool and Spa Leak Problems We Solve in Wellington
From rising water bills to wet decks, these are the issues Wellington homeowners call us about most. We find the source and fix it.
- High water lossPool losing more than an inch of water per dayYou add hundreds of gallons weekly, driving up your water bill and throwing off chemistry. The pump can run dry and burn out. We pressure test the plumbing and use acoustic listening devices to find the leak. Most cases are a cracked line or failed fitting. We repair it the same day and re-test to confirm.
- Wet deck spotWet spot near the equipment pad or deckConstant moisture attracts pests, kills landscaping, and can undermine the deck. It often signals an underground line leak. Our team uses thermal imaging cameras and moisture meters to map the saturation. Electromagnetic pipe locators trace the line. We pinpoint the break and repair it with minimal digging.
- Spa heat lossSpa losing heat or water overnightA leaking spa jet or heater line wastes energy and chemicals. The spa becomes unusable and the heater works harder. We isolate the spa plumbing with pressure testing equipment and check the jet bodies and light niche. Most spa leaks are fixed with epoxy pipe sealant or a new fitting. We test the repair before refilling.
- High water billHigh water bill with no visible leakYou pay for water you never use. The leak could be underground, in the pool line, or in the irrigation system. We start with a water meter and high water bill investigation, then move to pool and spa leak location. Acoustic listening devices and tracer gas leak detectors find hidden leaks. You get a full picture before any repair.
Why Wellington Homeowners Call Us First
A pinpointed leak means a smaller repair and a lower water bill.
No-Drain Leak Location
We locate most pool and spa leaks without draining the pool. Pressure testing equipment and acoustic listening devices work through the water and shell. That saves you 15,000 to 25,000 gallons of water and keeps the pool usable while we work. If a drain is needed, we tell you upfront and explain why.
Same-Day Appointments
Most pool leak detection Wellington calls get a same-day or next-day slot. We arrive with a full kit: thermal imaging cameras, moisture meters, and electromagnetic pipe locators. You get a written report with photos and a repair plan before we leave the property.
Accurate, Low-Cost Repairs
Pinpointing the leak means smaller repairs. A pinhole leak in copper pipe might need a pipe repair clamp and epoxy pipe sealant instead of a full line replacement. We have saved Wellington homeowners thousands by finding the exact failure point first.
Local Code and Soil Knowledge
Wellington sits on sandy soil and high water tables that shift with the seasons. We know how that affects PVC pipe, CPVC pipe, and PEX tubing underground.
What a written scope covers.
What a written scope covers and what shapes it. Prices are set by the business after the first look.
Included
- Full pool and spa visual inspection
- Pressure testing of all plumbing lines
- Thermal imaging of deck and soil
- Dye test for shell leaks
- Written report with photos
- Repair quote with material options
Depends on
- Number of plumbing lines to test
- Access to equipment pad and valves
- Underground versus above-ground leak
- Pool size and complexity
- Repair materials needed
- Commercial or residential system
What you receive
Clear records you can keep and share.
Leak report
Photos and location details
Pressure log
Test results for each line
Repair quote
Itemized materials and labor
Maintenance tips
How to prevent future leaks
Understanding pool and spa leaks
Not every water loss is a leak. Knowing the difference saves you a service call.
Evaporation
Normal water loss from heat and sun
- Quarter inch daily
- Higher in summer
- No wet spots
Plumbing leak
Water escaping from a pressurized line
- Pump loses prime
- Air in system
- Wet spot near pad
Shell leak
Water escaping through the pool structure
- Cracks in plaster
- Dye pulls in
- Level drops fast
What we work with
- Copper pipe
- PEX tubing
- PVC pipe
- CPVC pipe
- Pipe clamps
- Epoxy sealant
- Solder and flux
- Pipe fittings
Service ZIP codes.
A list like this tells people straight away whether you cover their street. Not listed? Call and ask: it only takes a minute.
- 33449
- 33414
- 33470
Towns we serve.
Based in Wellington and covering the places around it. Pick one for local details.
- Palm Beach Polo
- Equestrian Club
- Aero Club
- Binks Forest
- Black Diamond
- Grand Isles
- Isles at Wellington
- Olympia
- Saddle Trail Park
- Palm Beach Point
- Southfields
- Paddock Park
What Wellington Customers Say
Frequently Asked Questions
We start with a visual inspection and a moisture meter scan, then use acoustic listening devices and pressure testing equipment to isolate the leaking line. Thermal imaging cameras and dye tests confirm the exact spot. Most residential pools are diagnosed in one to two hours. You get photos and a written report before any repair begins.
A pool losing more than a quarter inch of water per day in Wellington is likely leaking, not evaporating. Evaporation in Florida runs about an eighth to a quarter inch daily. Mark your water level with tape, wait 24 hours, and measure. If the drop exceeds half an inch, call us for pool leak detection near me service.
The fee covers the full inspection, pressure testing, and a written report. Repairs are quoted separately after we find the leak.
Yes, most pool and spa leaks are located and repaired without draining. We use acoustic listening devices and pressure testing equipment that work through the water. Shell leaks get an underwater epoxy pipe sealant patch. Plumbing leaks on the equipment pad or in accessible lines are fixed directly. A full drain is rare and only needed for major structural repairs.
Related Services
Other services from the same team.
- Pipe Leak RepairOnce we find the leak, we fix it. We carry copper pipe, PEX tubing, CPVC pipe, pipe repair clamps, and epoxy pipe sealant on every truck. We test the line before we leave.
- Sewer and Drain Camera InspectionSewer line leaks cause sinkholes and odors. We run a RIDGID SeeSnake camera through the line to find cracks, root intrusion, and offset joints. You see the footage and get a written report with repair options.
- Water Meter and High Water Bill InvestigationA spiking water bill is usually the first sign of a hidden leak. We shut off every fixture, watch the meter, and isolate the culprit line. Most investigations take 60 to 90 minutes and cover irrigation, pool autofill, and interior plumbing.
Get Pool and Spa Leak Location Wellington FL Today
Stop losing water and money. Our team finds pool and spa leaks fast with acoustic, thermal, and pressure testing gear. Call now for same-day service in Wellington and Palm Beach County.
Contact Wellington Leak Detection
Call us at (561) 760-4218 or email info@wellingtonleakdetection.com. Most inspections are scheduled same-day or next-day. We serve Wellington and all of Palm Beach County.
- Phone
(561) 760-4218 - Email
info@wellingtonleakdetection.com - Address
Wellington, Florida